US Didactic Teaching Equipment, Educational Equipment, Trainers


	Home Request Information Search


	Educational Equipment in Engineering Education and Career & Technical Education Teaching Equipment and Trainers


	Electrical Installation Engineering EIT 1/2/11 Electric Domestic Installation Techniques 01.01 EST 1/2 Switching Three-phase Motors 01.02 EPH 1 Photovoltaic Trainer 01.03 ESM 1 Electrical Safety Measures (VDE0100) 01.04 EGT 1/2 Installation System Training Module 01.05 EIT 8 instabus EIB (Compact Unit) 01.06 ESM 4 Lightning and Over-voltage Protection 01.07 Electrical Power Engineering 02.00 EUB 1/2 Current and Voltage Transformers 02.01 EDP V Study of Transformers (Preliminaries) 02.02 EUL 1 Study of a Three-phase Transmission Line 02.03 EUG/EGP Generator Control and Protection 02.04 EUC 3/4 Energy Consumption Measurements and Peak Load Monitoring 02.05 EUB 5/7 Current-dependent, Overcurrent Time Relay 02.06 EPD 1/2 Manual and Automatic Busbar Change 02.07 Power Electronics, Drives, Electric Machines 03.00 MTI 4.1 Power Electronics I Line Commutated Static Converter 03.01 MTI 4.2 Power Electronics II Self Commutated Static Converter 03.02 MTI 10 Electric Machines for UniTrain-I 03.03 ENT 5 Single and Three-phase Transformers 03.04 EEM 2 Recording the Characteristics of DC Machines with a PC 03.05 EEM 4 Recording the Characteristics of Asynchronous Motors with a PC 03.06 EPE 10 Line-commutated Static Converters 03.07 EPE 20 Self-commutated Static Converters 03.08 EPE 11 Static Converter Drives with DC Motors 03.09 EDT 25 Frequency Converter with Asynchronous Motor 03.10 EDT 17 Industrial Soft-start 03.11 Fundamentals of Electrical Engineering and Electronics 04.00 G0 Fundamentals of Electrical Engineering and Electronics with the 19mm Plug-in System 04.01 G0 Further Topics in Electronics with the 19mm Plug-in System 04.02 MTI 1 Fundamentals of Electrical Engineering with UniTrain-I DC and AC Technology 04.03 MTI 2 Electronics with UniTrain-I 04.04 MTI 1/2 Fundamentals of Electrical engineering and Electronics with UniTrain-I MTI 3 Fundamentals of Digital Techn. with UniTrain-I 04.06 BTI Fundamentals of Electrical Engineering and Electronics with UniTrain-I Project Work Communications Technology 05.00 Analog Data Transmission with UniTrain-I 05.01 Data Transmission using Fibre-optic cable with UniTrain-I 05.02 Pulse Modulation Techniques with UniTrain-I 05.03 Data Transfer with Modems with UniTrain-I 05.04 Networking Technology using UniTrain-I 05.05 Terminal Device Connection System 05.06 CBT in Communications Technology 05.07 Microwave Techniques 05.08 Antenna Technology 05.09 Process Control 06.00 MTI 5.1 Analysis of Closed-loop Control Circuits 06.01 MTI 5.2/5.3 Controller Design and Organization Numerical Control / FUZZY Control 06.02 IAC Universal Digital Controller 06.05 IAC 10 Filling Level Control 06.06 ISC 1-3 DC / AC Servo Techniques 06.07 Transducers & Instrumentation 06.00 MTI 8.2 Non- electric Values Temperature, Pressure, Force 06.03 MTI 8.3 Non- electric Values Displacement, Angle, Speed 06.04 Microcmputers 07.00 CMC1...5 Programming with 8051 microcontrollers 07.01 CMC 10 Programming a PIC 16F84 microcontroller 07.02 CMP 1 Microprocessor Techniques 07.03 Automation Technology 07.00 CAS 1 AS-Interface 07.04 CLC 34 PLC S7-300 with Universal Application Simulator 07.05 CLC 35 Process Simulation PRO/TRAIN for Windows 07.06 CLP 20 Controlling Electric Drive Systems 07.07 Automotive Technology 08.00 ABC/AEC/K Training System for Automotive Electrical Engineering and Electronics 08.01 ALC Lighting, Signalling Systems and Check Control 08.02 MIT 9.4 Automotive Technology 4: Alternator 08.03 MTI 9.10 Automotive Technology 10: CAN-Bus 08.04 AEA 4 Sensors in Motor Vehicles 08.05 AMM 14/19/21 Mono-point, Multi-point and Diesel Injection with Connect® 08.06 AMM Software Connect® -Light and CONTEST 08.07 AMM 91 Connect® Engine Test Bench with Electronic Injection 08.08

	UniTrain-I Platform & Experiments Electrical engineering DC technology SO4204-4D AC technology SO4204-4F Three-phase technology SO4204-4H Magnetism/electromagnetism SO4204-4A Measurements with the multimeter SO4204-4B Electrical network analysis SO4204-4C EMC SO4204-4K Electronics Semiconductor components SO4204-5A Transistor multivibrators SO4204-5D Transistor and amplifier technology SO4204-5H Field-effect transistors SO4204-5K Operational amplifiers SO4204-5M Power semiconductors SO4204-5P Power supply circuits SO4204-5R Switched-mode power supplies SO4204-5S Circuit design and simulation using NI Multisim SO4204-5U PCB design using NI Multiboard SO4204-5V Prototype assembly and testing SO4204-5W Digital technology Gates and flip-flops SO4204-6A Sequential circuits SO4204-6C Application circuits SO4204-6E Converter circuits SO4204-6F Microprocessor Technology Micro Fundamentals Computer technology SO4204-6H Micros applications and programming SO4204-6J Instrumentation & Control Measuring of electrical variables U, I, P SO4204-8A Measuring of non-electrical variables temperature, pressure, force SO4204-8B Measuring of non-electrical variables displacement, angle, speed SO4204-8C RLC measurements SO4204-8D Servo Control Technology Components and control loops SO4204-8F Temperature, speed and light controlled systems SO4204-8G WINFACT software FUZZY Networks SO6001-5Q Power Electronics Drives Self-commutated static converters single-phase 3-phase Frequency inverters SO4204-7M Line-commutated static converters single-phase 3-phase SO4204-7N Frequency converter SO4204-7P Requires SO4204-7M and SO4204-7T Active power factor correction PFC SO4204-7Q Electric machines DC machines SO4204-7S Three-phase machines SO4204-7T Synchronous and slip-ring rotor machines SO4204-7U Stepping motor SO4204-7W Linear motor SO4204-7X Three-phase transformer SO4204-7Y Brushless DC motor SO4204-7Z Automation technology PLC and bus technology SO4204-8N Sensors for automation SO4204-8U Electro pneumatics SO4204-8V Mechatronics Transfer system with DC drive SO4204-8K Transfer system with Three-phase-drive SO4204-8L Selection subsystem SO4204-8M Assembly subsystem SO4204-8O Process subsystem SO4204-8P Testing subsystem SO4204-8Q Handling subsystem SO4204-8R Storage subsystem SO4204-8S Communication technology Quadripoles and filters SO4204-9A Coaxial lines SO4204-9D Fibre optics SO4204-9E 4-wire transmission lines SO4204-9F Pulse modulation PAM/PCM SO4204-9J Pulse modulation PTM SO4204-9K Modem methods ASK, PSK, FSK SO4204-9L AM/FM Modulation/Demodulation SO4204-9M AM transmitters and receivers SO4204-9N Networking TCP/IP SO4204-9Q Network Client integration SO4204-9R Fundamentals of microwave technology SO4204-9U Waveguide components SO4204-9V Fundamentals of antenna technology SO4204-9W Complex antenna systems SO4204-9X Microstrip SO4204-9Y Automotive technology Basics of DC and AC technology SO4204-7A Basics of electronics and digital technology SO4204-7B Pulse generation and ignition systems SO4204-7C Three-phase generator/alternator SO4204-7D LIN bus SO4204-7E Automotive sensors SO4204-7F Optical waveguides SO4204-7H In preparation Pulse Width Modulation PWM in motor vehicles SO4204-7J CAN Bus SO4204-7K Airbag SO4204-6Z

	Thermodynamics WL 203 Methods of Pressure Measurement Measurement of pressure above and below atmosphere WL 202 Fundamentals of Temperature Measurement Experimental introduction to temperature measurement (eight different temperature measurement methods): methods, areas of application, characteristics WL 920 Advanced Temperature Measurement Unit Static and dynamic measurement with different instruments WL 102 Boyle's Law Demonstration / PC Benchtop unit with PC data acquisition WL 352 Free and Forced Convection Unit / PC Convective heat transfer in a duct with PC data acquisition WL 362 Thermal Radiation Unit / PC Thermal and visible radiation with PC data acquisition WL 372 Heat Conduction Unit / PC Radial and linear heat conduction in solid materials WL 374 Heat Conduction in Solids Comparing various metals WL 900 Heat Conduction Trainer Temperature step capability WL 375 Advanced Conduction Unit Linear heat conduction in metal specimens WL 377 Natural Convection and Radiation Apparatus Heat transfer by convection and radiation in gases WL 376 Thermal Conductivity of Building Materials Heat conduction in non-metallic materials WL 373 Heat Conduction in Gases and Liquids Quantitative experiments on heat conduction WL 210 Flow Boiling Demonstration Flow regimes for forced convection boiling inside a tube WL 204 Marcet Boiler Recording the vapour pressure curve for water WL 220 Boiling Heat Transfer Unit Evaporation at a heated cylinder WL 230 Condensation Unit Different modes of condensation

	Thermodynamics Heat Transfer WL 302 Concentric Tube Heat Exchanger / PC Parallel and counterflow heat exchange with PC data acquisition WL 110 Heat Exchanger Service Unit Service unit for four different types of heat exchange WL 110.01 Tubular Heat Exchanger Experimental module for the WL 110 WL 110.02 Plate Heat Exchanger Experimental module for the WL 110 WL 110.03 Shell & Tube Heat Exchanger Experimental module for the WL 110 WL 110.04 Jacketed Vessel with Stirrer & Coil Experimental module for the WL 110 WL 308 Heat Transfer at Pipe Walls Concentric tube heat exchanger WL 315C Heat Exchanger Trainer Comparison of different heat exchanger types WL 312 Multipurpose Air Duct and Heat Transfer Unit Heat transfer in airflows WL 312.03 Heat Exchanger Element Direct Expansion Coil Accessory components for WL 312 unit WL 310 Cross-Flow Heat Exchanger Convective airflow heat transfer WL 314 Heat Transfer Bench Natural and forced convective heat transfer for air WL 314.01 Parallel Flow Module Heat transfer in a concentric tube heat exchanger WL 314.02 Mixed Flow Module Heat transfer in a cross-flow pipe bundle heat exchanger ET 300 Water-to-Air Heat Exchanger Trainer Transfer characteristics of a water-to-air heat exchanger WL 320 Water Cooling Tower Cooling tower with open water circuit and PC data acquisition WL 320.01 Cooling Column, Type 2 Cooling column with small wetting area WL 320.02 Cooling Column, Type 3 Cooling column with large wetting area WL 320.03 Cooling Column, Type 4 Cooling column without wetting area WL 320.04 Cooling Column, Type 5 Additional cooling column for the cooling tower WL 320 with variable wetting area and additional sensor ET 202 Solar Energy Demonstration / PC Model of a solar energy absorption system with PC data acquisition HL 313 Single Solar Collector System Conversion of solar energy into heat ET 250 Photovoltaic Trainer Function of solar cells WL 225 Fluidization and Heat Transfer Investigating fluidized beds

	Turbines - Steam - Rankine Cycle ET 795 Two-Shaft Gas Turbine Simulator Operation of a gas turbine system ET 796 Jet Turbine Module Single shaft gas turbine ET 794 Two-Shaft Gas Turbine System with radial compressor and turbines ET 792 Two-Shaft Gas Turbine / Jet Engine Two operating modes and optional PC data acquisition ET 512 Air Compressor Test Unit Small industrial compressor ET 500 Two-Stage Piston Compressor Unit Two-stage compressor with intercooler ET 513 Single-Stage Compressor Module One-cylinder machine ET 508 Two-Stage Air Compressor Simulator Simulated compressor system with intermediate cooling and aftercooling ET 810 Single-Cylinder Steam Engine Miniature steam power plant ET 850 Steam Generator Module Laboratory scale steam generator for wet or superheated steam ET 851 Steam Turbine Module Single-stage steam turbine for use with the ET 850 steam generator ET 813 Two-Cylinder Steam Engine Module Single-acting two-cylinder steam engine ET 813.01 Steam Generator Fully automatic operation ET 805.50 Throttling Calorimeter Determining the quality of a two-phase liquid-vapour mixture ET 860 Steam Boiler Safety & Control Familiarization with the design and function of boiler safety devices ET 830 Steam Power Plant Power plant with PC data acquisition ET 830.01 Cooling Tower Cooling tower designed for the ET 830 steam power plant

	Internal Combustion Engines CT 159 Modular Test Stand for Single Cylinder Engines, 2.2kW Test stand for engines with a power output of up to 2.2 kW CT 110 Test Stand for Single Cylinder Engines, 7.5kW Test stand for engines with a power output of up to 7.5 kW CT 300 Engine Test Stand, 11kW Operation as spark ignited petrol engine or as auto ignited diesel enginet CT 400 Brake Unit, 75kW, for 4-Cylinder Engines Complete engine test stand setup in conjunction with test engine HM 365 Universal Drive and Brake Unit Core unit with PC data acquisition CT 150 Four-Stroke Petrol Engine for CT 159 Four-stroke petrol engine with side valves CT 151 Four-Stroke Diesel Engine for CT 159 Four-stroke diesel engine with direct injection CT 152 Four-Stroke Petrol Engine w. Variable Compression for CT 159 Modified for variable compression CT 153 Two-Stroke Petrol Engine for CT 159 Two-stroke petrol engine CT 159.01 Electronic Engine Indicating System for CT 159 Cylinder pressure indication system CT 100.20 Four-Stroke Petrol Engine for CT 110 Air-cooled four-stroke petrol engine with carburettor CT 100.21 Two-Stroke Petrol Engine for CT 110 Air-cooled two-stroke petrol engine with carburettor CT 100.22 Four-Stroke Diesel Engine for CT 110 Air-cooled four-stroke normally aspirated diesel engine with direct injection CT 100.23 Water-Cooled Four-Stroke Diesel Engine for CT 110 Water-cooled four-stroke normally aspirated diesel engine with swirl chamber CT 100.13 Electronic Engine Indicating System for CT 110 System for cylinder pressure indication CT 100.11 Exhaust Gas Calorimeter for CT 110 Counterflow heat exchanger for calorimetric analysis of exhaust gases from internal combustion engines CT 300.03 Single Cylinder Engine w. Variable Compression for CT 300 Operation as external ignition petrol engine or auto-ignition diesel engine CT 400.01 4-Cylinder Petrol Engine Test engine for setting up an engine test stand in conjunction with the CT 400 brake and control unit CT 400.02 4-Cylinder Diesel Engine Test engine for setting up an engine test stand in conjunction with the CT 400 brake and control unit CT 159.02 Exhaust Gas Analyzing Unit Measurement of exhaust gas relevant parameters CT 400.09 Electronic Engine Indicating System for CT 400 Cylinder pressure indication system

	Refrigeration and Air Conditioning ET 499.01 Cutaway Model: Hermetic Refrigerant Compressor Cutaway model of an industrial refrigeration compressor ET 499.30 Cutaway Model: Ceiling Fan Air Cooler Cutaway models of industrial components used in refrigeration engineering ET 101 Basic Heat Pump Demonstrator Functional model of a water-to-water heat pump ET 415 Basic Refrigeration System Model of a commercially available domestic refrigerator with cooling compartment ET 350 Vapour Compression Refrigeration Cycle System with glass components ET 410 Refrigeration Technology Demonstration Panel Demo model of a refrigeration system ET 400 Refrigeration Training System Refrigeration plant demonstrator with PC data acquisition ET 102 Heat Pump Training System / PC Model for demonstrating an air-to-water heat pump with PC data acquisition ET 411C Basic Cycle Refrigeration Trainer / PC Training unit with various metering devices and PC data acquisition ET 413C Domestic Refrigeration Trainer / PC Trolley-mounted compression refrigeration system with PC data acquisition ET 165 Experimental Module Refrigeration System Refrigerating chamber with transparent door and adjustable heat load ET 351 Refrigeration Cycle with Open Compressor System with open compressor ET 419 Heat Transfer in a Refrigeration System Refrigeration system and heat pump ET 412C Industrial Refrigeration Trainer / PC Cyclic process with normal and deep-freezing stage and PC data acquisition ET 104 Heat Pump with Dual Mode Evaporator Water or air operated evaporator MT 210 Assembly & Maintenance Exercise: Refrigeration Project-based learnin exercise with high practical affinity for training in metalworking and electrical trades ET 150.01 Refrigerant Charging and Evacuation Station Accessory to evacuate and charge refrigeration systems ET 150.02 Tool Set Tool box with tools for the assembly of refrigeration systems including piping and electric wiring ET 900 Basic Modular Refrigeration System Training modules for simple refrigerant circuits ET 910 Advanced Modular Refrigeration System Constructing complex refrigerant circuits ET 910.10 Set of Training Panels Design of simple refrigeration systems ET 910.11 Set of Training Panels, Expansion Layout of compex refrigeration systems ET 915 Base Condensing Unit Base unit with PC interface for refrigeration and air conditioning ET 915.01 Single Chamber Refrigerator Module Model of a refrigerator for the ET 915 base condensing unit ET 915.02 Double Chamber Refrigerator Module Model of a refrigeration system for the ET 915 base condensing unit ET 915.04 Air Conditioner Module Model of an air conditioner ET 915.06 Domestic Air Conditioner Module Complete module of a simple air conditioning system for room cooling ET 915.07 Climatisation Module Fresh and recirculating air operation possible ET 420 Cooling Plant with Ice Store Industrial compression refrigeration system ET 422 Commercial Refrigeration Unit with Fault Simulation Refrigeration circuit with cooling and deep-freezing stages ET 426 Capacity Control Methods in Refrigeration Capacity regulation techniques ET 428 Multiple Compressor Refrigeration Control Capacity control using several refrigerant compressors ET 405 Reverse Cycle Refrigeration Training System 7 different modes, adjustable using 11 manually operated valves ET 480 Electrically Heated Absorption Refrigeration Unit Absorption cycle with electrical heating ET 482 Gas Heated Absorption Refrigeration Unit Absorption cycle with gas heating ET 352 Steam Jet Refrigeration System Steam ejector instead of mechanical Compressor ET 460 Oil Return in Refrigeration Systems Dissolved lubricants in refrigerants ET 103 Heat Pump with Pumpdown Control Air-to-water heat pump ET 171 Compressor Controls Trainer Refrigeration engineering ET 172 Refrigerant Compressor Fault Simulator Refrigerant compressor wiring ET 170 Domestic Air Conditioning Controls Simulation of a compressor and a fan motor ET 174 Industrial Air Conditioning Controls Finding and fixing faults ET 930 Trainer Refrigeration Control Simulation of a commercial freezer ET 340 HVAC Simulator Digital control of heating, ventilation and air conditioning (HVAC) systems ET 144 Refrigeration Wiring Skills Trainer Familiarisation with electrical installations in refrigeration systems ET 630 Split System Air Conditioner Modern air conditioner with heat pump, installed on a trolley ET 921 Domestic Air Conditioning Simulator Simulation of 3 different domestic air conditioning systems ET 450 Car Air Conditioning Trainer Complete car air conditioner ET 600 Open Duct Air Conditioning Trainer Air conditioner with refrigeration system ET 605 Recirculating Air Conditioning Trainer Climatic chamber with recirculation / fresh air operation ET 611 Air Conditioning System with Climate Chamber Full-size chamber for comfort testing ET 620 Full-Scale Air Conditioning Trainer Manual or automatic mode using commercially-available PLC climatic controller

		Heating and Ventilation HL 090 Supply Bench for Training Panels Frame for fitting the HL and ST series training panels HL 820 Universal Measuring System, Digital Sensors for experiments with the HL and ST series training panels with PC data acquisition HL 101 Thermal Expansion Training Panel Thermal expansion in pipes HL 104 Temperature Measurement Training Panel Typical measuring methods HL 102 Pipe Friction Training Panel Pressure loss in pipes HL 113 Valve Loss Training Panel Pressure loss at standard fittings HL 103 Fitting Loss Training Panel Pressure loss in pipe fittings such as elbows and bends HL 111 Fluid Friction Training Panel Friction loss in open pipes HL 210 Losses in Pipe Systems and Fittings Demonstration of friction loss HL 105 Three-Way Mixing Valve Training Panel Function of a three-way mixer HL 106 Four-Way Mixing Valve Training Panel Function of a four-way mixer HL 107 Circulating Pumps Training Panel Circulating pumps in heating systems HL 110 Expansion Vessel Training Panel Function of an expansion vessel HL 109 Safety Devices Training Panel Function of safety devices HL 112 Radiator Training Panel Radiators in a heating system HL 108 Domestic Heating Circuit Training Panel Model of a central heating system HL 305 Hydraulic Compensation of Radiators Compensation of a heating system HL 620 Domestic Heating System Control Training Panel Electronic heating control HL 630 Heating System Training Panel with PC Control Basic principles of heating technology with PC learning support HL 300 Central Heating System Components and functions of a modern heating system HL 350 Oil Burner Demonstrator Boiler with viewing windows for observing the flame HL 351 Domestic Heating Furnace Boiler with oil burner HL 352 Domestic Water Heating System Boiler with PC data acquisition HL 860 Exhaust Gas Analyser Easy to operate gas analysis device HL 360 Oil Tank Safety Trainer Trainer on heating oil storage in tanks HL 392C Safety & Control in Heating Systems Heating safety devices HL 510 Domestic Gas Supply Training Panel Exercises on gas pipes HL 500 Instantaneous Gas Heater Adjustment and fault-finding HL 358 Forced Air Gas Burner Training Panel Simulation of gas burner operation HL 356 Demo Unit, Gas Burner Electronic simulation of the operation of a forced air gas burner HL 530 Training Panel Function of Gas Heater Panel with clearly arranged components of a typical combination water heater HL 710 Ventilation Trainer Demonstration model for ventilation engineering HL 720 Ventilation System Trainer Comprehensive ventilation trainer with transparent duct sections HL 722 Control Unit for Ventilation System Temperature control unit for ventilation system HL 720

	Process Control Experiments RT 010 Training System: Level Control, HSI Extensive range of experiments on fundamentals of process control RT 020 Training System: Flow Control, HSI Extensive range of experiments on fundamentals of process control RT 030 Training System: Pressure Control, HSI Extensive range of experiments on fundamentals of process control RT 040 Training System: Temperature Control, HSI Extensive range of experiments on fundamentals of process control RT 050 Training System: Speed Control, HSI Extensive range of experiments on fundamentals of process control RT 060 Training System: Position Control, HSI Extensive range of experiments on fundamentals of process control RT 210 Process Control Rig Compact benchtop unit to control temperature, filling level, flow rate RT 200 Temperature Control Apparatus with Experimental Panels Use of a soldering iron as heating element for practice oriented experiments

	Process Control Trainers - Components RT 350 Trainer for Industrial Controllers Controlled system simulation RT 360 Networking of Industrial Controllers Process control system RT 370 Trainer for Field Bus Applications Networking of field bus modules RT 380 Trainer for Controller Tuning Response of the closed control loop RT 390 Test Stand for Control Valves Familiarisation with layout and operation RT 304 Calibration Bench Exact calibration and testing of control circuit components using precise measurement methods and sensors RT 310 Calibration Station Measurement of transient response and calibration of actuators used in control systems by precise measurement methods

	Process Control Trainers RT 450 Process Automation Training System: Base Module Modular training system providing an introduction to the fundamentals of process automation RT 450.01 Controlled System Module: Level under construction! RT 450.02 Controlled System Module: Flow under construction! RT 450.03 Controlled System Module: Pressure Main element in constructing a pressure control loop RT 450.04 Controlled System Module: Temperature Main element in constructing a temperature control loop RT 614 Level Control Demonstration Unit Experimental introduction to process control using an example of level control RT 624 Flow Control Demonstration Unit Experimental introduction to process control using an example of flow control RT 634 Pressure Control Demonstration Unit Experimental introduction to process control using an example of pressure control RT 644 Temperature Control Demonstration Unit Experimental introduction to process control using an example of temperature control RT 674 Flow / Level Control Demonstration Unit Experimental introduction to process control using an example of flow and / or level control RT 512 Level Control Trainer Experimental introduction to process control using an example of level control RT 522 Flow Control Trainer Experimental introduction to process control using an example of flow control RT 532 Pressure Control Trainer Experimental introduction to process control using an example of pressure control RT 542 Temperature Control Trainer Experimental introduction to process control using an example of temperature control RT 552 pH-Value Control Trainer Experimental introduction to process control using an example of continuous pH-value control RT 681 Test Stand for Level / Pressure Control Multivariable control system; strategies to realize non-interacting systems RT 682 Stirred Tank Test Stand Multivariable control system; strategies to realize non-interacting systems

	Process Control & Servo Control Systems RT 578 Multi-Process Control Trainer Industrial microprocessor-based controller with free parameter setting; 4 controlled variables RT 580 Industrial Process Control Rig Real control processes using the parameters level, flow and temperature RT 582 Boiler Heating Batching Process Control System Liquid-level, flow rate, temperature and pressure control system, cascade control RT 584 Heat Exchanger Process Control System Laboratory test stand for temperature control RT 590 Process Control Training Plant Training on adjustment, operation, maintenance and faultfinding using fault simulation RT 800 PLC Application: Mixing Process Trainer for control of discontinuous mixing processes by PLC RT 710 Hydraulic Servo System Complete model of a hydraulic servo control loop RT 121 Fuzzy Control: Ball-on-Beam Mechanical model of Ball-on-Beam system RT 122 Fuzzy Control: Inverted Pendulum Non-linear model with two actuators RT 123 Fuzzy Control: Ball-on-Plate Two-dimensional mechanical model RT 124 Fuzzy Control: Carrier Vehicle with Inverted Pendulum Complex mechanical model with two degrees of freedom

	Unit Operations CE 380 Enzymatic Reactors Packed bed chemical and biological catalytic reactors CE 300 Ion Exchange Demonstration Unit Continuous water softening or demineralisation RT 586 Analytical Process Control System Monitoring and control of quality of industrial waste water CE 105 Corrosion Studies Unit Easy to observe experiments on corrosion and corrosion protection using specimens made of four different materials CE 100 Tubular Flow Reactor Demonstration of the influence of temperature and contact time on chemical reactions CE 310 Chemical Reactors Trainer Basic unit to study and compare various reactors using the example of a saponification CE 130 Convection Drying Convection dryer for drying experiments on granular substances CE 715 Rising Film Evaporation Rising film evaporator for increasing the concentration of temperature-sensitive solutions CE 600 Continuous Rectification Continuous and discontinuous rectification with packed and sieve tray column CE 602 Discontinuous Rectification Discontinuous rectification with packed and sieve tray column CE 400 Gas Absorption Separating a CO2/air mixture by absorption in countercurrent CE 540 Adsorptive Air Drying Continuous process with regeneration of adsorbent CE 520 Cooling Crystallisation Investigation of crystal growth in a fluidised bed CE 620 Liquid-Liquid Extraction Regeneration of solvent using integrated distillation system CE 630 Solid-Liquid Extraction Discontinuous and continuous solid-liquid extraction CE 530 Reverse Osmosis Membrane separation process for obtaining solvent from a salt solution CE 640 Biotechnical Production of Alcohol


	Engineering Education Statics Experiments TM 110 Apparatus for Statics Experiments Experimental and demonstration unit on elementary topics of statics TM 115 Force Apparatus Distribution of forces in a central system TM 110.01 Supplementary Kit Inclined Plane and Friction Supplementary experiment for visualising spring elongation, inclines and mechanical friction FL 111 Basic Roof Truss Force distribution and force resolution in simple frameworks TM 110.02 Supplementary Kit Block and Tackle Supplementary experiment for visualising the physical relationships between pulley blocks TM 110.03 Supplementary Kit Gear Systems Supplementary set for illustrating the function of single- and multistage gear trains EM 049 Simple Moments Apparatus Symmetrical lever SE 110.53 Experimental Set Equilibrium of a Rigid Body Equilibrium of a ladder leaning against a wall SE 130.01 Warren Girder Fully assembled truss with full bridge strain gauges for measurement of the forces in the members TM 210 Precision Friction Measurement Apparatus Friction measurement with increased precision TM 200 Friction Measurement Apparatus Basic principles of friction clearly demonstrated in a student experiment TM 225 Friction on Inclined Plane Weight and friction forces on an inclined plane TM 232 Bearing Friction Apparatus Journal bearing friction with different bearing materials; comparison with roller bearing friction SE 110.21 Experimental Set Forces in a Truss Force distribution in plane trusses SE 110.22 Experimental Set Redundant Truss Forces in redundant trusses SE 130 Structures Table with Standard Roof Truss Forces in a howe roof truss WP 960 Shearing Force and Bending Moment Apparatus Bar subject to a point force application of the section principle WP 961 Shearing Force Apparatus Bar subject to a point force application of the section principle WP 962 Bending Moment Apparatus Bar subject to a point force application of the section principle SE 110.50 Experimental Set Suspension Cable Natural sag line of a chain SE 110.18 Experimental Set Suspension Bridge Force distribution on a suspension bridge SE 110.12 Experimental Set Influence Line Loading of a three span beam SE 110.17 Experimental Set Three Hinged Arch Force distribution on a loaded three hinged arch SE 110.16 Experimental Set Parabolic Arch Loaded parabolic arch

	Strength of Materials Experiments TM 400 Apparatus to Investigate Hooke's Law Demonstration of Hooke`s law WP 100 Apparatus for Testing Torsion and Deflection Elastic deformation under bending and torsion FL 170 Curved Bar Apparatus Bending deformation on curved bars WP 950 Beam Apparatus Reaction forces and deflection WP 130 Combined Bending and Torsion Apparatus Checking failure hypotheses and comparative stresses FL 160 Unsymmetrical Cantilever Apparatus Demonstration of the bending and unsymmetrical bending of bars WP 121 Euler Strut Theory Demonstration Unit Euler buckling cases WP 120 Buckling Tester Buckling behaviour of bars

	Dynamics Experiments KI 110 Crank and Connecting Rod Apparatus Conversion of rotary motion into oscillatory motion KI 120 Slotted Link Apparatus Harmonic reciprocating motion KI 130 Four Bar Chain Conversion of rotary motion into oscillatory motion KI 140 Whitworth Quick Return Apparatus Portable unit to demonstrate uneven reciprocating motion KI 150 Hooke's Coupling Apparatus Portable unit demonstrating the transmission behaviour of jointed shafts KI 160 Ackermann Steering Demonstrator Table or wall mounted unit for steering geometry GL 100 Gear Trains Apparatus Introduction to the basic principles of gears and terms GL 105 Gear Trains Model Investigation of transmission ratios on spur gear units TM 600 Centrifugal Force Apparatus Portable unit for experiments on centrifugal forces TM 605 Coriolis Force Demonstrator Apparent forces in a rotating reference system TM 630 Gyroscope Table mounted unit demonstrating the characteristics of gyroscopes TM 632 Governor Apparatus Unit to demonstrate the function of governors TM 610 Inertia in Rotational Motion Apparatus Experiments on moment of inertia TM 611 Rolling Disc on Inclined Plane Table mounted unit for basic experiments on dynamics TM 155 Free and Forced Vibration Apparatus Basic experiments on mechanical vibration TM 150.02 Free and Damped Torsional Vibrations Supplementary set for the universal vibration system TM 150 / TM 155 TM 150 Universal Vibration System Comprehensive introduction into the basic principles of mechanical vibration TM 151 Sensor Supply Module Supply and measured data conditioning for the TM 150.01, TM 620.01 and TM 625.01 Vibration Sensors TM 140 Torsional Vibration Apparatus Table mounted experiment investigating torsion and torsional vibration TM 170 Static and Dynamic Balancing Apparatus Demonstrating the process of balancing TM 180 Balance of Reciprocating Masses Investigation of mass forces on a reciprocating piston machine TM 620 Critical Speed Investigation Apparatus Portable unit investigating the vibration behaviour of machine rotors TM 625 Whirling Shaft Apparatus Portable unit investigating the critical speed of thin elastic shafts and rotors

	Mechanical Demonstration Models TM 121 Wheel and Axle Apparatus Equilibrium of moments TM 122 Wheel and Differential Axle Apparatus Equilibrium of moments, force reduction on the differential axle TM 123 Spur Gear Lifting Apparatus Mode of operation and layout of toothed gearing mechanisms TM 124 Worm and Wheel Apparatus Mode of operation and layout of a worm gear TM 125 Winch Demonstration of the functioning of a winch TM 612 Flywheel Apparatus Basic principles of rotational motion TM 161 Compound Pendulum Apparatus Pendulum oscillations TM 162 Bifilar / Trifilar Suspension Apparatus Oscillation experiments with a thread pendulum

	Stress and Strain Analysis FL 100 Strain Gauge Training System Comprehensive introduction to measurement using strain gauges FL 102 Strain Gauge Calibration Apparatus Measuring system to determine the k-factor of strain gauges FL 101 Strain Gauge Kit Carrying case with comprehensive set of equipment for attaching strain gauges to mechanical components FL 151 Multi Channel Measuring Amplifier Supply and signal conditioning unit for strain gauge systems FL 120 Round Diaphragm Apparatus Deflection and strain in a membrane under constant pressure FL 130 Thin Cylinder Apparatus Direct stress in a tank wall in the longitudinal and peripheral direction FL 140 Thick Cylinder Apparatus Portable unit to determine the stress distribution in a tank wall FL 200 Transmitted Light Polariscope Generation of stress images in mechanically loaded models FL 210 Overhead Polariscope Attachment for overhead projectors to demonstrate the basic principles of photoelastics

	Theory of Machines GL 300.01 Cutaway Model: Worm Gear Manually operated open samples of various drive components and elements GL 300.02 Cutaway Model: Mitre Gear Manually operated open samples of various drive components and elements GL 300.03 Cutaway Model: Spur Gear Manually operated open samples of various drive components and elements GL 300.04 Cutaway Model: Multistage Gear Combination Manually operated open samples of various drive components and elements GL 300.05 Cutaway Model: Planetary Gear Manually operated open samples of various drive components and elements GL 300.06 Cutaway Model: Adjustable Cone Pulley Drive Manually operated open samples of various drive components and elements GL 300.07 Cutaway Model: Control Gear Manually operated open samples of various drive components and elements GL 300.08 Cutaway Model: Electromagnetic Multiple-Disc Brake Manually operated open samples of various drive components and elements GL 300.12 Cutaway Model: Pillow Block with Bearings and Shaft Manually operated open samples of various drive components and elements TM 310 Thread Efficiency Testing Equipment Thread efficiencies for different pairs of materials and thread pitches TM 320 Screw Tester Correlation between tightening torque and tension force on standardised bolts TM 220 Belt Friction Apparatus Investigation of rope and belt friction TM 280 Journal Bearing Apparatus Unit for demonstrating the distribution of lubricating films in plain bearings TM 282 Journal Bearing Friction Apparatus Learning the fundamentals of hydrodynamic lubrication by experimentation TM 290 Hydrodynamic Bearing Apparatus Investigating different bearing clearances with journals of a shaft of different diameters TM 260 Tribology Trainer Basic Module Modular experimental system on sliding and rolling friction TM 260.01 Experimental Module Rolling / Sliding Disc Slip forces in two discs rubbing together TM 260.02 Experimental Module Optical Elastohydrodynamics Investigation of the form and thickness of lubrication films TM 260.03 Experimental Module Pin on Disc Investigations into wear on pairs of friction materials with surface contact TM 260.04 Experimental Module Slip / Stick & Friction Vibration Difference between static and sliding friction, appearance of transition TM 260.05 Experimental Module Block on Ring Friction Pairs of friction materials with point contact having different lubrication states TM 260.06 Experimental Module Journal Bearing Pressure Distribution Radial distribution of pressure in plain bearings TM 262 Hertzian Contact Apparatus Demonstration of the characteristics of a contact area GL 110 Cam Mechanism Demonstration and measurement of the displacement curves for cam mechanisms GL 410 Gear Assembly Unit: Simple Drives Flexible and robust assembly system for mechanical drive systems GL 420 Gear Assembly Unit: Combined Drives Flexible and robust assembly system for mechanical drive systems GL 430 Gear Assembly Unit: Step and Shift Gears Flexible and robust assembly system for mechanical drive systems GL 200 Demonstrator for Lathe Gearing Layout Open model of gear mechanism for an industrial lathe AT 200 Apparatus for Determination of Gear Efficiency Complete testing unit to determine gear efficiencies GL 112 Cam Analysis Apparatus Plotting of lift curves GL 210 Geared System Apparatus Dynamics of a multiple stage spur gear unit GL 212 Two-Stage Epicyclic Gear Apparatus Investigation of rotational dynamics of a two-stage epicyclic gear AT 100 Universal Drive Unit Experimental motor with speed and torque measurement

	Material Testing WP 300 Universal Material Tester, 20 kN Familiarising students with the basic concepts of material testing WP 300.04 Bending Device Bending beam under point load WP 300.10 Device for Shearing Experiments Type of shear loading as on rivets and bolts WP 300.11 Device for Cupping Experiments Practical cupping experiment for the investigation of the material properties of thin sheet WP 310 Hydraulic Universal Material Tester, 50 kN Stand alone unit with hydraulic drive for a variety of material tests WP 400 Pendulum Impact Tester, 25 Nm Experimental unit for notched bar impact tests WP 410 Pendulum Impact Tester, 300 Nm Notched bar impact bending test with increased impact energy WP 500 Torsion Tester, 30 Nm Fundamental experiments on torsional loading WP 510 Torsion Testing Machine, 200 Nm, Motor Driven Motor driven torsion experiments with PC data acquisition WP 140 Fatigue Testing Machine Portable unit for the demonstration of fatigue strength testing WP 600 Creep Testing Machine Investigation of materials with a known tendency to creep

	Structural Mechanics SE 100 Universal Testing Frame, 400 kN Portal frame for loading experiments on components from civil engineering SE 110.47 Experimental Set Virtual Work Alternative solution method looking into bending beam cases SE 110.19 Experimental Set Stability of Structures Simple stability problems SE 111 Universal Test Frame and Stand Mounting frame made of steel tube for experiments on structural mechanics and strength of materials SE 110.44 Experimental Set Deflection of Trusses Application of Castigliano`s theorem SE 110.20 Experimental Set Portal Frame Deformation of rigid frames under load SE 110.29 Experimental Set Torsion of Rods & Tubes Basic principles of torsional deformation SE 110.58 Experimental Set Free Vibration of a Bar Rayleigh's method to evaluate the natural frequency of a bar

	Fluid Mechanics Hydraulics Bench HM 110 Hydrodynamics Trainer Basic hydrodynamics HM 111 Pipe Network Bench Layout of various pipe networks HM 112 Hydrodynamics Trainer / PC Comprehensive range of experiments in hydrodynamics with PC support HM 115 Properties of Fluids and Hydrostatics Bench Comprehensive experimental introduction to hydrostatics HM 150.02 Dead-Weight Piston Gauge Familiarisation with a calibration process HM 150.05 Hydrostatic Pressure Apparatus Hydrostatic force on a plane surface HM 150.06 Stability of a Floating Body Determining the metacentre HM 152 Flow Visualisation Table Two-dimensional flow patterns HM 153 Depiction of Streamlines Flow patterns around various shapes HM 134 Falling Ball Viscometer Dynamic viscosity of a liquid HM 135 Drag Coefficients for Spheres Determination of sink velocities HM 150 Basic Hydraulics Bench Support bench for fluid mechanics experimental modules HM 151 Basic Hydraulics Bench / Gravimetric Gravimetric flow rate measurement HM 150.07 Bernoulli´s Principle Demonstrator Verification of Bernoulli\'s equation HM 150.32 Pressure Distribution in a Venturi Nozzle Function of a venturi nozzle HM 150.18 Osborne Reynolds Demonstrator Laminar and turbulent flow visualisation HM 150.35 Horizontal Osborne Reynolds Demonstrator Laminar and turbulent flow in a horizontal pipe HM 150.36 Pitot-Static Tube Apparatus Static and dynamic pressure measurement HM 150.10 Flow Visualisation Apparatus Visualisation of streamline patterns HM 150.01 Pipe Friction Apparatus Pipe friction loss for laminar and turbulent flow HM 150.11 Fluid Friction Apparatus Pressure loss in a pipe system HM 150.29 Losses in Bends and Fittings Resistance coefficients for valves and fittings HM 150.13 Methods of Flow Measurement Three basic types of flowmeter HM 150.40 Vortex Flowmeter Continuous and intermittent flow rate measurement HM 150.09 Orifice and Jet Velocity Apparatus Horizontal discharge from nozzles HM 150.12 Orifice Discharge Apparatus Loss in free jet vertical discharge HM 150.14 Impeller Vortex Apparatus Free and forced vortex phenomena HM 150.31 Rotating Tank Vortex Apparatus Vortex formation in liquids HM 150.03 Flow Over Weirs Accessory Flow rate measurement using weirs HM 150.21 Flow Channel Flow around various bodies HM 150.08 Impact of Jet Apparatus Impact forces on different deflectors HM 150.04 Variable Speed Centrifugal Pump Characteristics of a side channel pump HM 150.16 Twin Centrifugal Pump Configurations Series and parallel operation of radial-flow pumps HM 150.19 Demonstration Pelton Turbine Model of an impulse turbine HM 150.20 Demonstration Francis Turbine Reaction turbine with adjustable guide vanes HM 150.15 Hydraulic Ram Pump Pumping with water hammer effect HM 241 Principles of Hydraulics Computer-assisted fundamentals of fluid mechanics HM 150.37 Rotameter Variable area flow meter on sturdy frame

	Pipe Flow, Pipe Networks HM 120 Pipe Fitting Loss Demo Panel Pressure loss in fittings and valves HM 125 Pipe Friction Bench Pressure loss in pipe sections HM 122 Fluid Friction in Pipes and Fittings Resistance and head loss for turbulent pipe flow HM 500 Flowmeter Trainer Familiarisation with various flow rate measuring devices HM 500.04 Electromagnetic Flowmeter Accurate flow rate measurement with minimum friction loss HM 500.10 Paddle-Wheel Turbine Flowmeter with Indicator Sensor with digital display HM 500.13 Orifice Flowmeter with Transmitter Two-wire transmitter HM 155 Water Hammer Apparatus Pipe coil 60 m length

	Pumps and Turbine Demonstrator HM 280 Centrifugal Fan Demonstrator Interchangeable fan wheels HM 282 Axial-Flow Fan Demonstrator Small axial-flow fan HM 292 Centrifugal Compressor Demonstrator Two-stage centrifugal compressor HM 283 Centrifugal Pump Demonstrator Typical centrifugal pump HM 284 Series / Parallel Pump Demonstrator Two identical pumps HM 285 Piston Pump Demonstrator Typical positive displacement pump HM 286 Gear Pump Demonstrator Typical positive displacement pump HM 287 Axial-Flow Reaction Turbine Demonstrator Stand-alone reaction turbine HM 288 Radial-Flow Reaction Turbine Demonstrator Reaction turbine principle HM 289 Pelton Turbine Demonstrator Impulse turbine HM 291 Axial- Flow Impulse Turbine Demonstrator Axial-flow constant-pressure turbine HM 290 Turbine Demonstrator Supply Module Water supply unit for HM 288, HM 289 and HM 291

	Pumps, Turbines, Fans HM 270 Air-Operated Impulse Turbine Axial-flow constant-pressure turbine HM 272 Air-Operated Reaction Turbine Radial-flow turbine HM 215 Two-Stage Axial - Flow Fan Single or series operation HM 210 Centrifugal Fan Centrifugal fan airflow HM 300 Basic Centrifugal Pump Centrifugal fan airflow HM 305 Industrial Centrifugal Pump Standard pump with speed control HM 310 Side Channel Pump Self-priming centrifugal pump HM 330 Series / Parallel Pumps Twin speed-controlled pumps HM 332 Series / Parallel Pumps / PC Twin speed-controlled pumps with PC data acquisition HM 299 Pump and Compressor Unit Comparison of reciprocating machines & turbomachines HM 360 Multi-Pump Trainer Positive displacement pump and two types of centrifugal pump HM 365 Universal Drive and Brake Unit Core unit with PC data acquisition HM 365 Universal Drive and Brake Unit Core unit with PC data acquisition HM 365.10 Water Pump Supply Module Supports water pump experiments HM 430.C0 Francis Turbine Demonstration Unit / PC Experimental set-up with closed water circuit HM 450.C0 Basic Unit, Pump and Turbine Trainer/PC Pump and turbine experiments with PC data acquisition HM 365.20 Oil Pump Supply Module Basic module for the operation of various oil pumps HM 365.32 Turbine Supply Module Supports turbine experiments HM 365.45 Axial-Flow Pump Module Axial-flow propeller pump HM 450 Pump and Turbine Trainer Pump and turbine experiments HM 405 Axial-Flow Turbomachines Pump or turbine configuration

	Aerodynamics, Air Flow, Wind Tunnel HM 170 Educational Wind Tunnel Open subsonic wind tunnel HM 172 Supersonic Wind Tunnel Interchangeable test sections for subsonic, Mach 1.4 and Mach 1.8 HM 226 Flow Visualisation Wind Tunnel Compact wind tunnel with smoke generator HM 225 Airflow Bench Supports a wide range of aerodynamic experiments HM 225.02 Boundary Layer Apparatus Boundary layer at two surfaces HM 225.03 Bernoulli's Equation Apparatus Investigating Bernoulli's equation HM 225.04 Drag Force Apparatus Flow around various bodies HM 225.05 Flow Around a Bend Pipe bend flow HM 225.06 Jet Attachment Apparatus Pneumatic logic element HM 225.08 Flow Visualisation Apparatus Streamlines in the flow past bodies HM 220 Airflow Study Unit Free jet at a fan outlet HM 220.01 Venturi Tube Bernoulli accessory module HM 220.02 Boundary Layer Flow Boundary layer around a plate HM 240 Principles of Airflow Computer-assisted fundamentals of airflow HM 240.03 Electronic Pitot Sensor Pressure and velocity distribution HM 240.04 Cylinder Pressure Distribution Transverse flow around a cylinder HM 240.05 Pipe Fittings Friction loss in pipe elements HM 240.06 Heat Transfer Forced convection in an airflow HM 230 Compressible Flow Unit Supersonic flow possible HM 260 Nozzle Performance Study System Relationship of nozzle pressure, back pressure and critical pressure ratio HM 261 Nozzle Pressure Distribution Compressible flow in nozzles

	Hydrology, Teaching Flumes, Flow Channels HM 163 Modular Flow Channel 5 m, Working Section 400x500 mm Modular channel from 5 m to 15 m lengths HM 160 Multi-Purpose Teaching Flume Open channel HM 162 Modular Flow Channel / 300 x 450 mm Modular channel from 5 m to 15 m lengths HM 161 Large Flow Channel Working section 16 m length HM 164 Flume for Open and Closed Flow Flume and pipe flow HM 140 Sediment Transport Channel Sediment movement in flumes HM 166 Benchtop Sediment Transport Channel Closed water circuit HM 168 Flow Visualisation and Mobile Bed Channel Investigating water courses HM 142 Separation in Sedimentation Tanks Settling of slurries HM 169 Drainage and Seepage Tank Ground water flows HM 165 Basic Hydrology System Seepage processes, run-off and ground water levels HM 141 Rainfall Hydrograph Investigation of the effect of rainfall on the ground HM 143 Surge Tank and Reservoir Unsteady flow HM 167 Ground Water Flow Sub-surface water flow and seepage HM 156 Surge Tank and Water Hammer Unit Effects of flow rate changes HM 159.11 Ship Vibration Apparatus Investigation of the vibration behavior of the model ship in air and in water (with additional tank)

	Cutaway Models - Pumps & Valves HM 700.01 Cutaway Model: Standard Orifice Plate Commercial fitting as cutaway model HM 700.02 Cutaway Model: Flow Nozzle Commercial fitting as cutaway model HM 700.03 Cutaway Model: Standard Venturi Meter Commercial fitting as cutaway model HM 700.04 Cutaway Model: Globe Valve Commercial fitting as cutaway model HM 700.05 Cutaway Model: Corner Stop Valve Commercial fitting as cutaway model HM 700.06 Cutaway Model: Angle Seat Valve Commercial fitting as cutaway model HM 700.07 Cutaway Model: Non-Return Valve Commercial fitting as cutaway model HM 700.08 Cutaway Model: Pressure Reducing Valve Commercial fitting as cutaway model HM 700.09 Cutaway Model: Line Strainer Commercial fitting as cutaway model HM 700.10 Cutaway Model: Gate Valve Commercial fitting as cutaway model HM 700.11 Cutaway Model: Plug Valve Commercial fitting as cutaway model HM 700.12 Cutaway Model: Three-Way Plug Valve Commercial fitting as cutaway model HM 700.13 Cutaway Model: Ball Valve Commercial fitting as cutaway model HM 700.14 Cutaway Model: Safety Valve Commercial fitting as cutaway model HM 700.15 Cutaway Models: Various Pipe Unions Commercial fitting as cutaway model HM 700.16 Cutaway Models: Pressure Gauges Commercial fitting as cutaway model HM 700.17 Cutaway Model: Centrifugal Pump Clearly laid out benchtop model HM 700.20 Cutaway Model: Piston Pump Clearly laid out benchtop model HM 700.22 Cutaway Model: Gear Pump Clearly laid out benchtop model VS 101 Cutaway Model: Underground Hydrant Cutaway model from water and gas mains VS 102 Cutaway Model: Resilient Seated Gate Valve Cutaway model from water and gas mains VS 103 Cutaway Model: Flanged Globe Valve Cutaway model from water and gas mains VS 104 Cutaway Model: Changeover Valve Cutaway model from water and gas mains VS 105 Cutaway Model: Gas Meter Cutaway model from water and gas mains VS 106 Cutaway Model: Backflow Preventer Cutaway model from water and gas mains VS 107 Cutaway Model: Swing Check Valve Cutaway model from water and gas mains VS 108 Cutaway Model: Water Meter Cutaway model from water and gas mains VS 109 Cutaway Model: Strainer Cutaway model from water and gas mains VS 121 Demo Panel Cathodic Protection Demonstration of cathode-based corrosion protection VS 131 Demo Panel Pipe Cleaning and Maintenance Common methods and tools for cleaning pipes VS 132 Pipe Inspection Camera Demo Panel Suitable for professional use

	Filtration Experiments CE 275 Gas Flow Classification Zigzag sifter to separate solid compounds CE 280 Magnetic Separation Sorting with a drum-type magnetic separator CE 115 Fundamentals of Sedimentation Separation of suspensions by sedimentation HM 142 Separation in Sedimentation Tanks Visualisation of flow conditions CE 282 Disc Centrifuge Continuous separation of emulsions CE 235 Gas Cyclone Solid separation from gases with a cyclone CE 225 Hydrocyclone Observation of fan and strand discharge CE 116 Cake and Depth Filtration Cake and depth filtration with different suspensions and filter medium layers CE 117 Flow through Particle Layers Investigation of the properties of packed and fluidised beds subjected to liquid flow CE 287 Plate and Frame Filter Press Separation of solids from suspensions with a plate and frame filter press CE 283 Drum Cell Filter Continuous cake filtration of suspensions with a drum cell filter CE 284 Nutsche Vacuum Filter Cake filtration with a Nutsche Vacuum Filter CE 286 Nutsche Pressure Filter Cake filtration with a Nutsche Pressure Filter CE 285 Suspension Production Unit Supply unit for experimental filtration units CE 283, CE 284, CE 286 CE 245 Ball Mill Observation of the milling process CE 320 Stirring Visualisation of flow fields when using various stirrer types CE 255 Rolling Agglomeration Dish granulator with adjustable rotation speed and angle of inclination CE 210 Flow of Bulk Solids from Silos Influence of wall material and angle of inclination of hopper wall on flow profile and outflow time CE 200 Flow Properties of Bulk Solids Design of bulk solids silos using a ring shear tester CE 220 Fluidised Bed Formation Comparison of fluidised bed formation in gases and liquids CE 250 Pneumatic Transport Transparent tubes and tanks to observe different transport states


	2003 COPYRIGHT US DIDACTIC, INC. ALL RIGHTS RESERVED