Home           Products           Company           Contact us     
Engineering Mechanics and Machine Elements
> Statics
> Strength of Materials
> Dynamics
> Theory of Machines
> Material Testing
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
Process Control and Process Engineering
Overviews
Products  |  Engineering Mechanics and Machine Elements  |  Material Testing  |  WP 300  |  WP 300.04
WP 300.04 Bending Device Show data sheet (pdf file) Print page
Technical Description

Using this accessory for the universal material tester WP 300, a bending bar is investigated. This is mounted on two supports and loaded with a point force generated by the tester. By sliding the bearing it is possible to apply the force in different positions and change the support width. An I-section steel beam is used as the base. This is straightforwardly bolted to the lower cross-member on the WP 300. Using the apparatus, the relationship between load and elastic deformation can be demonstrated. The influence of the modulus of elasticity and planar moment of inertia is also demonstrated.

 
Learning Objectives / Experiments

- Loading of a bending bar by a point force
- Influence of modulus of elasticity and planar moment of inertia on

  elastic deformation
Features

* Elastic deformation of a bending bar by a point force1
* Support width and point of application of force can be

  chosen
Specification

[1] Supplementary experiment on the WP 300 universal material tester for the elastic deformation of bending bars subject to a point force
[2] Test bar made of cold drawn flat steel
[3] Cross-section 40x12mm, length 320mm
[4] Support width adjustable width
[5] Moveable bearing, semicircular seat
[6] I-section steel beam as bearing base
[7] Comprehensive experiment instructions, also as pdf

 
Technical Data

Bending bar

- flat steel cold drawn
- cross-section: 40x12mm
- length: 320mm
Support width, adjustable: 100...300mm

 
Scope of Delivery
1 bending device
1 set of experiment instructions
Order Details
020.30004  WP 300.04  Bending Device
Print
© 2005 G.U.N.T. Gerätebau GmbH