 |
 |
 |
 |
 |
TM 110 Fundamentals of Statics Demonstration of force and moment equilibrium in a mechanical force system
|
 |
TM 110.01 Supplementary Set - Inclined Plane and Friction Measurement and demonstration of spring deflection, inclined plane and mechanical friction
|
 |
TM 110.02 Supplementary Set - Pulley Blocks Construction and mode of operation of 3 different pulley blocks
|
 |
TM 110.03 Supplementary Set - Gear Wheels Mode of operation of single-stage and multi-stage toothed gear mechanisms
|
 |
TM 115 Forces in a Crane Jib Graphical and experimental determination of forces in a planar central force system
|
 |
FL 111 Forces in a Simple Bar Structure Resolution of forces in a simple bar structure
|
 |
EM 049 Equilibrium of Moments on a Two-Arm Lever Investigation of applied forces, generated moments and equilibrium
|
 |
SE 110.53 Equilibrium in a Single Plane, Statically Determinate System experimentelle Erarbeitung des wichtigen Prinzips "Freimachen" in der Statik
|
 |
TM 210 Dry Friction A range of experiments relating to static and dynamic friction
|
 |
TM 200 Fundamentals of Mechanical Friction Investigation of mechanical friction forces on two solid bodies moving against each other in a uniform manner
|
 |
TM 225 Friction on the Inclined Plane Experiments to understand the fundamentals of mechanical friction on an inclined plane
|
 |
TM 232 Bearing Friction Sliding bearing friction with different bearing material pairings and comparison with rolling bearing friction
|
 |
SE 110.21 Forces in Various Single Plane Trusses Using strain gauge technology to measure bar forces
|
 |
SE 110.22 Forces in an Overdeterminate Truss Comparison of forces in statically determinate and statically indeterminate trusses
|
 |
SE 130 Forces in a Howe Truss Investigation of bar forces under different load cases
|
 |
SE 130.01 Truss Beam: Warren Girder Bars with strain gauge full bridges to measure bar stress
|
 |
WP 960 Beam on 2 Supports: Shear Force & Bending Moment Diagrams Application of the method of sections to determine internal reactions of the beam
|
 |
WP 961 Beam on Two Supports: Shear Force Diagram Application of the method of sections to determine the shear force
|
 |
WP 962 Beam on Two Supports: Bending Moment Diagram Application of the method of sections to determine the bending moment
|
 |
SE 110.50 Cable under Dead-Weight Catenary of a free-hanging cable under dead-weight
|
 |
SE 110.18 Forces on a Suspension Bridge Supporting cable force and demonstration of bending moments between the roadway support and supporting cables
|
 |
SE 110.12 Lines of Influence on the Gerber Beam Using methods of section and conditions of equilibrium of statics to determine support forces
|
 |
SE 110.17 Three-Hinged Arch Symmetric and asymmetric arch subjected to point, distributed or moving loads
|
 |
SE 110.16 Parabolic Arch Differences between statically determinate and statically indeterminate arches under load
|
 |
SE 112 Mounting Frame Base unit for clear and simple set-up of experiments on statics, strength of materials and dynamics
|
|