Vibration analysis is a key tool in estimating the condition of a roller bearing. The slow change in the vibration spectrum provides indications of the remaining life of a bearing and can be used as a criterion for its replacement. The spectral distribution can deliver accurate information on the type and location of the damage. This accessory set-up contains six roller bearings on which different faults can be detected and explained. The radial load on the bearing can be set within broad limits using the belt drive accessory set PT 500.14 (setting of belt tension; fixed load).
The accessory set-up is mounted on the base plate of the machinery diagnosis base system PT 500. To measure and evaluate the experiment, the computerised vibration analyser PT 500.04 is required. It includes all the necessary sensors, a measurement amplifier and analysis software to record the vibration phenomena.
Learning Objectives / Experiments
- Vibrational spectrum of the running noise of roller
bearings - Influence of damage to outer race, inner race or
roller body, on the spectrum - Estimating service lives of roller bearings - Influence of the lubricant on the vibration spectrum - Detection of faulty roller bearings - Understanding and interpreting frequency spectra - Use of a computerised vibration analyzer
* Assessment of bearing condition by vibration
analysis1 * Comparison of bearings with different faults
 Investigation of the vibrations of roller bearings  Roller bearings with damaged outer race  Roller bearings with faulty inner race  Roller bearings with damaged rolling element  Roller bearings with combined damage  Long-running roller bearings  New and undamaged roller bearings  Radial loading of bearings with PT 500.14 (belt drive)  Accessory set for PT 500 machinery diagnostic training system  Stackable box for all components
Grooved ball bearing of type 6004 - inside diameter: d=20mm
- outside diameter: D=42mm - width: 12mm - reference circle: D=31mm - ball diameter: D=6.35mm - number of balls: 9
Dimensions and Weight
l x w x h : 600 x 400 x 120 mm (box) Weight : approx. 6 kg